Table of Contents
Advertisement
Zone Inputs
This menu allows the configuration of established alarm zones. A single or multiple trigger can be used to
generate an alarm. It is possible to allocate up to 32 alarm zones to carry out a combination of actions. Use
these options in conjunction with the Zone Actions menu.
Entry timer
Exit timer
Zone
Title
Pre-Alarm sec.
66
This is the number of seconds allowed for the user to enter the zone
and disable the alarms. If the alarm is not disabled within this period
the alarm will be triggered.
This is the number of seconds from the alarm being set within which
the user must exit the set zone. If the user is still within the zone after
this time period the alarm will be triggered.
An alarm zone can be established to logically groups alarms and
initiate actions when an alarm is activated, there are 32 configurable
zones.
This information is stored along with the relevant images in the
database, ensure this has relevance to the alarm zone.
This is the time period prior to the start of the alarm included with the
alarm recording for archive. These images will also be protected from
being overwritten.
Dedicated Micros ©2011
Advertisement
Table of Contents
