Table of Contents
Advertisement
Max Transmission Rate kbits/sec This shows the maximum transmission speed for the network type
Note:
This setting will limit and override any higher transmission rate entered in the Video
Transmission menu (Configuration menu->Live Trans).
Tx Image Buffers
Ethernet MTU Bytes
Max Transmission Timeout ms
Reset (Red)
Rem Report (Green)
Webcam (Yellow)
Email (Blue)
Refresh (Purple)
Dedicated Micros ©2011
being used. If set to '0', transmission speed is not limited in the
camera.
This is used in order to improve the picture delivery over Ethernet
when using a slow connection i.e. 256Kbps. A buffer setting of 1,2 or
3 is available (default setting is 1).
This is the maximum transmit unit for the Ethernet packet. The MTU
is the largest physical packet size measured in bytes that the network
can transmit. By default this figure is set to 1500bytes.
This is the time (in milliseconds) the unit will wait to re-send a packet
if an acknowledgement is not received.
Resets the unit to apply changes.
Opens the Network Settings->Remote Reporting page.
Opens the Network Settings->Web Camera Configuration page.
Opens the Network Settings->Email page.
Refreshes the current page.
81
Advertisement
Table of Contents
