Table of Contents
Advertisement
Accessing the Configuration Pages
The unit is configured using the on-board configuration pages. To access these:
1.
Launch a web browser, preferably on a PC on the same subnet as the unit.
6.12
2.
Type the IP address (or DNS name if there is no fixed IP address) of the unit into the address bar.
3.
If prompted, enter a username and password. The default settings are;
username:dm and password:web.
4.
The Main Menu page will be displayed.
6.13
The configuration menus are accessible via the link on the left hand side of the page
Dedicated Micros ©2011
15
Advertisement
Table of Contents
