Table of Contents
Advertisement
Default
The unit has a range of pre-defined configurations available. As standard the unit can record at 5pps
MPEG4 and at a selected number of days. Alternatively the unit can be configured for 2pps JPEG recording
on each camera or for MultiMode operation (note that this will result in the record duration being determined
by the time period the unit is in alarm).
Note:
This page is only relevant if images are being recorded to the camera. If a DVR is being used,
recording direct to the camera may be disabled.
Days Recording
Timed Expiry
Camera Settings
Record Duration/Enhance Quality The recording duration can be limited to a set number of days;
Default All (Green)
Refresh (Purple)
Dedicated Micros ©2011
Displays the record duration possible using the current configuration.
If required, all stored recorded video can be permanently deleted after
a set number of days. Set to '0' to de-activate this function.
Choose the rate of non alarm recording to be used from the range
of preset recording profiles. Select from Normal Rate-MPEG4 5pps,
Normal Rate-JPEG 1pps or Normal Rate-MultiMode recording.
allowing the recording quality to be enhanced for a shorter storage
period.
Restore record settings to factory defaults.
Refreshes the current page.
47
Advertisement
Table of Contents
