13
The Camera has support for one relay. Connect the relay to the multiway connector arrowed in
the image.
Relay Connection Information
1 onboard light duty relay output (500mA@12V-48V Max)
The relay is not polarity sensitive.
14
The unit supports one channel of bi-directional audio. Connect the audio equipment using a
3.5mm 90° jack plug to the phono socket shown in the image below.
Audio Connection Information
3.5mm (phono) socket, 8KHz/16KHz/22KHz sampling 75Ω input impedance, 1V pk-pk,
amplification req on output
Sleeve - ground,
Tip - audio out
Ring - audio in
15
Replace the dome front cover and tighten the torx screws, taking care not to trap the retaining
cord in the edge of the front cover. Do not over-tighten the torx screws.
The power supply must be a class 2 isolated type.
Dedicated Micros ©2011
11