Specification - NetVu CamVu500 Installation And Configuration Manual

Vandal dome
Table of Contents

Advertisement

Specification

IMAGER
1/4" CMOS progressive scan
VIDEO PROCESSOR
SoC DSP (CW5631)
EFFECTIVE PIXELS
640 (H) x 480 (V)
SENSITIVITY
0.3lux at F1.2
OUTPUT RESOLUTION
480p, 2CIF, CIF, QCIF
COMPRESSION
JPEG, MPEG-4 & H.264, Multiple Simultaneous streams of any to different viewers
MAXIMUM IMAGE RATE
Maximum 25pps @ 480p (single connection to camera)
SENSOR SIGNAL TO NOISE RATIO
Greater than 50dB
SENSOR DYNAMIC RANGE
50dB
AGC
Digital
ALARMS
2 alarm inputs and 1 relay output
AUDIO
1x audio input (mono) – 3.5mm jack, 47kΩinput impedance ;
1x audio ouput (mono) – 3.5mm jack, 47kΩinput impedance
COMPOSITE VIDEO OUTPUT
(PAL / NTSC) live display, operational for 10 minutes initially (user configurable) to enable camera focusing /
configuration. Video output can also be used as part of a media display or emergency messaging capability..
LENS
Integrated 2.8-10mm Varifocal with DC iris, F1.3 ; Aspherical glass with IR corrective coating
MOUNTING
Surface: via fixing screws provided, 3-axis GyroView set up
DATA CONNECTIONS
Ethernet: 10/100 BaseT RJ45 Connector ; Storage: Micro SD slot for recording. Supplied with 2GB class 4
card as standard, AoE support for localised external video storage
128
Dedicated Micros ©2011

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dm/cmvuvrd500Dm/cmvuvrd500/n

Table of Contents