DEVICE SETTINGS
Before connecting to the SmartGen Micro encoder, software must be configured for the proper
communications mode. By pressing the 'Settings' button, situated in bottom-left corner, the
Settings dialog will appear:
From here, the appropriate connection may be selected regarding to the hardware configuration
of the SmartGen Micro device. By pressing the 'Connect' button, the Software will attempt to
connect to SmartGen Micro device and read its current configuration:
ATTENTION: In the bottom-right part of the screen is visible the status of the connection. Any
success or failure will be indicated there.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
- 34 -