Connecting The SmartGen Micro
IMPORTANT CONNECTION CONSIDERATIONS!
The SmartGen Micro encoder must be properly configured for the desired operating mode:
sidechain or loop-through before it is installed in the signal path. Use SmartGen Basic Encoder
Manager (see "Hardware & RDS Configuration" on page 35) to confirm that the encoder is properly
configured before connecting the SmartGen Micro to other air-chain equipment.
Also, it is important that the operating software be installed on the PC before it is connected
to the encoder for programming the 'static' message registers and operating defaults. In addition,
we heartily recommend testing the encoder with its controlling interface (computer, terminal,
automation, etc.) before it is placed in the air chain. This will ensure that 2-way communication
with the encoder can be established and that the encoder is properly initialized.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
- 20 -