Loop-Through Mode - DEVA Broadcast SmartGen Micro Maintenance And Operation Instruction Manual

Basic rds/rbds encoder with usb connectivity

Hide thumbs Also See for SmartGen Micro:

Table of Contents

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com

LOOP-THROUGH MODE

In the loop-through mode, the output of the stereo generator is cabled directly to the PILOT

OR MPX INPUT of the SmartGen Micro as shown in Figure below. Connect the RDS OR MPX

OUTPUT of the encoder to a composite/MPX wideband input of the FM exciter. When configured

for loop-through operation, the composite/MPX signal passes through the encoder with unity gain,

and with the RDS subcarrier added.

Loop-Through Encoder Connection

- 22 -

Table of Contents