Installing The USB Port Driver under Windows
1. With the SmartGen Micro powered-up, connect the front-panel USB port to the computer
using the cable supplied. This should immediately bring up a "Installing driver" balloon notification
above the computer Taskbar. Click on balloon for status or proceed to step 3.
notification will bring up only once on first device connection. Subsequent connections
NOTE:
will not be notified.
2. Under installation failure, the following status will be shown:
3. Start the Device Manager - Start > Control Panel > Device Manager.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
- 30 -
®
7