Table of Contents
Advertisement
Configuration of the terminal, computer or automation system obviously will depend on
parameters placed by hardware and firmware. For simplicity, the encoder ASCII programming
illustrations in this section will utilize HyperTerminal, the terminal emulation program by
Hillgraeve, Inc., developed for Microsoft and supplied with the Windows
is hoped that programming instructions based on terminal emulation will help the programmer
understand what ASCII syntax the encoder requires, serving as an example for direct-connection
with station automation.
If using HyperTerminal, it's best first to upgrade to the latest version. Download this from www.
hilgraeve.com/htpe. The more current product seems to run more smoothly and has text editing
features not found in earlier versions.
NOTE:
Do not connect the SmartGen Micro Encoder until the HyperTerminal program has
been configured properly.
HyperTerminal is started under Windows
Accessories / Communications / HyperTerminal. Double-click: HyperTrm.exe. This brings up
the main HyperTerminal screen with a Connection Description window for naming your encoder
communications program. How this connection is configured depends on the serial (COM) port
will be addressed.
Terminal Configuration
®
- 38 -
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
with the command routine: Start / Programs /
®
operating system. It
Advertisement
Table of Contents
