Loading And Running The Simplified Software; Minimal System Requirements; Installing The Software - DEVA Broadcast SmartGen Micro Maintenance And Operation Instruction Manual

Basic rds/rbds encoder with usb connectivity

Hide thumbs Also See for SmartGen Micro:

Table of Contents

Loading and Running The Simplified Software

Pentium(R) Processor or Compatible

Windows XP and above

512MB RAM

20MB free hard drive space for installation

16 or 32-bit graphics color depth

1024 by 768 pixels screen resolution

Screen DPI setting to 96 dpi

Universal Serial Bus 2.0

To avoid hardware conflicts and encoder connection problems, install the software

NOTE:

before attempting to connect the encoder with the computer.

Insert the supplied CD. Click Start, then My Computer, and then double-click the CD Drive

(typically D:). Open the SmartGen Micro folder and double click the installation file to launch the

Wizard (shown here) that will guide you through the several installation steps.

Unless you have a specific reason to make changes, simply accept the default recommendations

and click Next> at each step.

Next, follow the procedure below to install the USB driver.

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com

- 27 -

Table of Contents