Fujitsu fi-6000NS Operator's Manual page 368

Screen
Standby Mode
Admin Pass-
word
IP Address
340
Message
Auto logout time must be shorter than
that for standby mode.
Current password has not been
entered.
Invalid current password has been
entered.
New password has not been entered.
New password contains invalid char-
acters.
Confirm Password has not been
entered.
Password and Confirm Password do
not match.
Passwords must contain at least 7
characters.
IP Address has not been entered.
Subnet Mask has not been entered.
Default Gateway has not been entered.
IP Address is incomplete.
Subnet Mask is incomplete.
Default Gateway is incomplete.
IP address is invalid.
Subnet mask address is invalid.
Default gateway address is invalid.
Specified IP address is already being
used.
IP Address and Default Gateway must
be different.
Action
Enter a shorter time for auto logout
("Logout after") than for standby
mode ("Standby after").
Enter a current password.
Check the status of the "Caps
Lock" and "Num Lock" indicators,
and re-enter the current password.
Enter a new password.
Enter a valid new password.
Alphanumeric characters (case
sensitive) and symbols may be
entered.
Enter the same password again in
the Confirmation Password field.
Enter the same password string in
both the New and Confirm Pass-
word fields.
Re-enter a new or confirm pass-
word that contains at least 7 char-
acters.
Enter an IP address.
Enter a subnet mask.
Enter a default gateway.
Complete the IP address.
Complete the subnet mask.
Complete the default gateway.
Enter a valid IP address.
Enter a valid subnet mask address.
Enter a valid default gateway
address.
Enter a different IP address.
Enter an IP address and default
gateway that are different.