Fujitsu fi-6000NS Operator's Manual page 380

Screen
User Log
System Log
User Data
Store
352
Message
No user logs.
OK to clear the combined User Log?
No system logs.
OK to clear the System Log?
Maximum file path length is 253 char-
acters.
Specified user data store contents are
invalid.
OK to overwrite the current user data
store?
Specified backup file could not be
uploaded, or is not a valid user data
store.
Restoring from the specified backup
file will cause the maximum number
of user data stores to be exceeded.
Clear the existing user data stores, and
try again.
User data could not be restored. Speci-
fied file contains unsupported data.
User data store was successfully
restored.
Action
No action required.
To clear the combined User Log,
press the [OK] button.
Otherwise, press the [Cancel] but-
ton.
No action required.
To clear the System Log, press the
[OK] button.
Otherwise, press the [Cancel] but-
ton.
File path is too long.
Set a file path that is no longer
than 253 characters long.
Check the contents of the specified
user data store file.
To restore data, press the [Yes]
button. Otherwise, press the [No]
button.
Try the following:
• Check if the specified backup
file is correct.
• Try restoring the file again.
• Specified backup file may not
be uploaded because of network
error. Check the network status.
Up to 1,000 users can be regis-
tered. Clear the existing user data
stores, and try again.
"Clearing the User Data Store"
(page 152)
Versions do not match between the
backup device and restoring device.
Update the restoring device.
"3.9.3 Updating the Scanner's Sys-
tem Software" (page 163)
No action required.