Fujitsu fi-6000NS Operator's Manual page 100

HINT
72
•
If the IP address is the same as one already in use, network communica-
tion problems will occur. In this case, try the following steps:
1. Disconnect the LAN cable and turn the scanner off.
2. Reboot the scanner with the LAN cable disconnected, and enter a
nonduplicate IP address.
3. Re-connect the LAN cable to the scanner.
•
When DHCP is set to "On", the following settings are assigned by the
DHCP:
•
IP Address
•
Subnet Mask
•
Default Gateway
•
DNS Server
•
WINS Server
Even if DNS or WINS server is set, priority is given to the scanner set-
tings over the DHCP settings.
•
The connection will be lost if the scanner's IP address is changed via the
network interface. If connecting via an IP address, to continue with other
settings, login to the network interface again using the new IP address.