Fujitsu fi-6000NS Operator's Manual page 259

3. Select the color mode.
Color Mode
Auto
RGB Color
Black & White
⇒
Selecting a brightness level returns you to the "Scan Settings" screen.
The selected mode is displayed to the right of the [Color Mode] button.
•
Usually, the color mode should be set as [Auto].
HINT
If this setting is specified, there is no need to change the color mode each
time you scan a document.
Note that black and white mode may be automatically selected for the fol-
lowing kinds of documents:
•
•
•
To ensure such documents are scanned in color mode, press the [RGB
Color] button on the "Color Mode" screen.
•
If the [Auto] paper size is selected, the [Custom] paper size Long Page
mode cannot be used.
•
If the [Black & White] color mode is selected, the following options cannot
be used:
•
•
Automatically decides whether to scan in color or in black and white
based on document contents.
Scans documents in color.
Scans documents in black and white.
Faintly toned nonwhite papers
Documents with only a minor amount of color
Documents printed in gray or other close-to-black colors.
[JPEG] File Format
Compression
Network Scanner fi-6000NS Operator's Guide
4.8 Setting the Scan Options
Description
4
231