Fujitsu fi-6000NS Operator's Manual page 416

Code
12020003
12020004
12020005
12020006
12020100
12040001
388
Message
"From" address was rejected by
the server when sending fax.
"To" address was rejected by
the server when sending fax.
Fax size exceeded maximum
fax size allowed by the SMTP
server.
SMTP server connection was
lost while sending fax data.
Error: fax could not be sent.
Cannot find the network folder
path.
Action
Contact a system administrator to check
that the specified e-mail source address is
authorized for use on the server.
Contact a system administrator to check
that the specified e-mail destination
address is authorized for use on the server.
Contact a system administrator to check
the "Maximum Attachment Size" setting.
"3.6.6 Setting the e-Mail Server (SMTP
Server)" (page 84)
Try the following:
• Check that the LAN cable of the scanner
and SMTP server is connected properly.
• Contact a system administrator to check
that then scanner IP address and SMTP
server settings are correct.
"6.3 Network Connection Troubleshoot-
ing" (page 296)
• Contact a system administrator to check
that the SMTP server is working prop-
erly.
• Contact a system administrator to check
the maximum e-mail size allowed by
the SMTP server.
Contact a system administrator to check if
sending fax is allowed.
Try the following:
• Check that the LAN cable of the scanner
and file server is connected properly.
• Check that the file server is working
properly.
• Contact a system administrator to check
that the scanner IP address and network
folder settings are correct.
"6.3 Network Connection
Troubleshooting" (page 296)