Fujitsu fi-6000NS Operator's Manual page 424

Code
12040001
12040002
12040003
12040005
12040006
12040007
12040008
12040009
396
Message
Cannot find the network folder
path.
Access to network folder was
refused.
File already existed, so data
could not be saved.
Network is busy. Try again
later.
User name or password may be
incorrect.
Not connected to the network.
Scan&Buffer job is already
queued on the computer that
owns the specified network
folder.
Insufficient free space in the
designated network folder.
Action
Try the following:
• Check that the LAN cable of the scanner
and file server is connected properly.
• Check that the file server is working
properly.
• Contact a system administrator to check
that the scanner IP address and network
folder settings are correct.
"6.3 Network Connection
Troubleshooting" (page 296)
Try the following:
• Contact a system administrator to check
whether or not access to the network
folder is permitted for the currently
logged in user or authenticated user.
• Check if the file attribute has been set as
hidden.
To overwrite the existing file, on the
"Save" screen, set "Overwrite old files?" as
"Yes", and try again.
Try again later.
Re-enter the user name and password.
Check that the system network is function-
ing normally by performing a ping test
from another machine in the network, other
than the server with network folder. If the
system network is not operating correctly,
refer to "Failure to connect to a server by
name" (page 307) for further solutions.
Try the following:
• Select a different network folder.
• Wait a short time, then try again.
Ensure the free space requirements are
met, and try again.