Fujitsu fi-6000NS Operator's Manual page 254

6. Select if existing files with the same name are to be overwritten.
The default setting is [No].
If a file name already exists on the network, the existing file will not be overwritten and the
scanned data will be lost. Whether or not the file was successfully saved can be checked in
the user log.
For more details about accessing the user log, refer
265).
7. Press the [Scan] button.
When [Scan Viewer] is Off, this will be a [Scan&Save] button.
⇒
Scanning starts.
Each page is briefly shown on the screen as it is scanned.
When the scan has completed, the "Scan Viewer" screen opens.
For more details about the "Scan Viewer" screen, refer to
in the Scan Viewer" (page
HINT
8. Check the scanned data.
For more details about the "Scan Viewer" screen, refer to
the Scan Viewer" (page
226
261).
•
"Scan Viewer" is initially "On".
•
When the [Scan&Save] button is pressed (when [Scan Viewer] is "Off"),
after the last page is displayed on the "Scanning" screen, the scan data is
saved, and the touch panel screen returns to the "Main Menu".
For more details, refer to
258).
261).
to"4.11 Checking the User Log" (page
"4.10 Editing the Scanned Data
"4.9 Enabling/Disabling the Scan Viewer" (page
"4.10 Editing the Scanned Data in