Seat Ateca 2016 Owner's Manual page 97

Fig. 105 In the engine compartment: main
beam headlight bulb and turn signal bulb
2
.
3
Follow the steps indicated:
Main beam headlight bulb
1. Raise the bonnet.
›››
Fig. 104
2. Move the loop
rection of the arrow and remove the cov-
er.
›››
3. Slide connector Fig. 105
or right and pull.
4. Remove the bulb by disconnecting the
connector.
5. Installation involves all of the above
steps in reverse sequence.
Turn signal bulb
1. Raise the bonnet.
2. Move the loop
rection of the arrow and remove the cov-
er.
3. Turn the bulb holder
clockwise and pull.
4. Remove the bulb by pressing on the
bulb holder and turning it anticlockwise
at the same time.
5. Installation involves all of the above
steps in reverse sequence.
in the di-
1
to the left
2
Fuses and bulbs
›››
Fig. 104 in the di-
1
›››
Fig. 105 anti-
3
Front fog light bulb*
Fig. 106 Fog light: extracting the grille.
»
95