Seat Ateca 2016 Owner's Manual page 137

● When the car door is opened, the "Coming
Home" lighting comes on. The headlights are
turned off 60 seconds after the vehicle door
is opened.
Deactivation
If no door has been closed, they go out au-
●
tomatically after 60 seconds.
After the last door has been closed, the
●
headlights will be switched off after the
"Coming Home" delay (as established in the
radio menu) has elapsed.
● On turning the light switch to position 
›››

page 23.
● When the ignition is switched on (when
starting the engine).
Function "Leaving Home"
The "Leaving Home" function is only availa-
ble for vehicles with a light and rain sensor
(rotary light switch in position ).
This function may be connected/disconnec-
ted through the radio menu. The "Leaving
Home" function switch-off delay may also be
set (default: 30 sec).
Vehicle with halogen headlights
In the "Leaving Home" function, the daytime
running lights (DRL), the rear side lights and
the licence plate lights are switched on.
Lights and visibility
Vehicle with full-LED headlights
In the "Leaving Home" function, the dipped
beams, the daytime running lights (DRL), the
rear side lights and the registration plate
lights switch on ("Welcome Light").
Activation
● When the vehicle is unlocked using the re-
mote control.
● The "Leaving Home" function is only activa-
ted when the rotary light switch is in position
 and the light sensor detects darkness.
Deactivation
● When the "Leaving Home" delay period
ends (default: 30 sec).
● When the vehicle is locked using the re-
mote control.
● When the light control is switched into a
position other than .
● With the ignition is switched on.
Hazard warning lights

Fig. 135 Dash panel: switch for hazard warn-
ing lights.
Read the additional information carefully
›››

page 24
The hazard warning lights are used to draw
the attention of other road users to your vehi-
cle in emergencies.
If your vehicle breaks down:
1. Park your vehicle at a safe distance from
moving traffic.
2. Press the button to switch on the hazard
›››
warning lights .
3. Switch the ignition off.
4. Apply the handbrake.
5. For a manual gearbox, engage 1st gear;
for an automatic gearbox, move the gear
lever to P.
»
135