Seat Ateca 2016 Owner's Manual page 23


›››
in Safety instructions on page 81
Retaining the child seat with the "ISOFIX/i-Size"
ISOFIX/iSize securing rings.
Fig. 31
Child restraint system approved under ECE R129
i-U Valid position for front-facing and rear-
facing child restraint systems approved
under ECE R129.
X: Invalid position for child restraint sys-
tems approved under ECE R129.
The essentials
You are obliged to follow the seat manufac-
turer's instructions.
● Remove the protective caps of the "ISO-
FIX/iSize" rings by placing a finger in the
›››
hole and pulling up Fig. 31.
● Press the child seat onto the "ISOFIX" re-
taining rings until the child seat can be heard
to engage securely. If the child seat is equip-
ped with Top Tether* anchor points, secure it
Front passenger seat
airbag on airbag off
X
to the correspondent ring
the manufacturer's instructions.
● Pull on both sides of the child seat to en-
sure that it is properly anchored.
Child seats with the "ISOFIX" and Top Tether*
attachment system are available from Techni-
cal Services.
Vehicle i-Size positions
Rear side seat
X i-U
›››
Fig. 32. Observe
Rear central seat
X
21