Seat Ateca 2016 Owner's Manual page 205

it stops completely if a vehicle in front of it
stops.
The ACC will still be available for a few sec-
onds. The vehicle will restart by itself if the
vehicle in front moves (traffic jam assistant).
Disconnection criteria
The ACC will switch off if the driver applies
the brake pedal or the driver's door is
opened.
Restarting the vehicle with the ACC manually
The ACC can be activated again by moving
›››
the lever to position Fig. 180.
2
CAUTION
If your vehicle with ACC does not start up
●
as expected, you can drive off by briefly step-
ping on the accelerator.
The Start-Stop system usually acts if you
●
are driving with ACC.
Driver assistance systems
Interrupting control
On the left of the steering column:
Fig. 180
third lever for operating the Adaptive Cruise
Control.
Important: the ACC is active.
Interrupting control during driving
● Move the lever to the position
standby message is displayed to the driver.
or
Brake.
●
● To resume the programmed speed, turn the
lever to position .
2
Interrupt speed control with the vehicle sta-
tionary
Applies to vehicles with automatic gearbox:
● Move the lever to the position
standby message is displayed to the driver.
● To resume control, apply the brake and turn
the lever to position
WARNING
It is dangerous to activate control and resume
the programmed speed if the road, traffic or
weather conditions do not permit this. Risk of
accident!
Setting the distance
. The ACC
3
Fig. 181 Control lever: setting the distance.
● To display the distance currently program-
med, briefly press the rocking button
›››
Fig. 181.
To increase/reduce the distance one level,
●
press the rocking button again towards the
left/right. The instrument panel display
modifies the distance between both vehicles.
. The ACC
3
If the vehicle approaches another vehicle de-
tected in front of it, the ACC reduces the
.
2
»
203