Seat Ateca 2016 Owner's Manual page 45

To switch a specific function on, press the ap-
propriate button. Press the button again to
switch off the function.
1
Temperature
2
Fan
3
Air distribution
4


Defrost function





 




The LED on each control lights up to indicate
that the respective function of a control has
been switched on.
The left and right sides can be adjusted separately: Turn the control to adjust the temperature
The power of the fan is automatically adjusted. The fan is also adjusted manually by turning the control.
The airflow adjusts automatically for comfort. You can also switch it on manually using the buttons
Indications on the temperature display screen selected for the right and left sides.
The air drawn in from outside the vehicle is directed at the windscreen and air recirculation is automatically switched off. To defrost the wind-
screen more quickly, the air is dehumidified at temperatures over approximately +3°C (+38°F) and the fan runs at maximum output.
The air is directed at the chest of driver and passengers by the dash panel air vents.
Air distribution towards the footwell.
Upward air distribution.
Heated rear window: this only works when the engine is running and switches off automatically after a maximum of 10 minutes.
Air recirculation
Seat heating buttons
Press the button to switch on or off the cooling system.
Press the button to make maximum cooling capacity available. The recirculation of air and the cooling system turn on automatically and air distri-
bution adjusts automatically to the position .
When the warning light for button  lights up, the settings on the driver side also apply to the passenger side. Press the button or the temper-
ature control on the passenger side
The essentials
.
3
»
43