Seat Ateca 2016 Owner's Manual page 100

Changing number plate light bulbs
Fig. 112 In the rear bumper: number plate
light.
Number plate light: Remove the bulb
Fig. 113
holder.
Follow the steps indicated:
1. Press the number plate light in the direc-
›››
tion of the arrow
2. Remove the number plate bulb slightly.
98
3. In the connector lock, turn
wards the arrow
tor.
4. Rotate the bulb holder in the direction of
arrow
5. Replace the defective bulb with a new
bulb with the same features.
6. Insert the bulb holder in the number
plate light and turn in the opposite di-
rection of arrow
7. Plug the connector into the bulb holder.
Note
Depending on how equipped the vehicle is,
the number plate lights may be LEDs. LEDs
have an estimated life that exceeds than that
of the car. If a light with LEDs fails, go to an
authorised workshop for replacement.
Fig. 112.
Emergencies
›››
Fig. 113 to-
and pull the connec-
1
and extract it with the bulb.
2
until it stops.
2