Seat Ateca 2016 Owner's Manual page 250

CAUTION
● The camera images are only two-dimen-
sional. Due to a lack of spatial depth, objects
that jut out or holes on the road, for example,
are more difficult to detect or may not be
seen at all.
In certain circumstances, the camera does
●
not capture objects such as beams, fences,
posts or thin trees, which could damage the
vehicle.
● The system displays the auxiliary lines and
boxes regardless of the vehicle's environ-
ment, no objects are detected. The driver is
responsible for determining that the vehicle
will fit in the parking space.
CAUTION
In order to guarantee good system operation,
keep the cameras clean, free of snow or ice,
and do not cover them with adhesives or oth-
er objects.
● Never use abrasive cleaning products to
clean the camera lenses.
Do not use hot or warm water to remove ice
●
or snow from the camera lenses. Doing so
could damage the lenses.
248
Operation
Area View system
Fig. 212 Display of the Area View system: aer-
ial view.
There are four different views to choose from:
Key to the Fig. 212:
Symbol Meaning
Front camera area
A
Right camera area
B
Rear camera area
C
Left camera area
D

Exit the current display.

Three-dimensional views
Depending on the equipment: connect-

ing and disconnecting the ParkPilot
sound.
Key to the Fig. 212:
Symbol Meaning
Setting the display: brightness, contrast

and colour.
The aerial view is generated by combining
the images from all the cameras 
›››
Fig. 212. The aerial view can be selected
by pressing the vehicle in the area.
Select the corresponding view by pressing
›››
the different areas Fig. 212
aerial view or the reduced aerial view.
Conditions necessary for the use of the Area
View system
The doors and the rear lid must be closed.
●
● The image must be reliable and clear. For
this reason, for example, the camera lens
must be clean.
The area around the vehicle must be clearly
●
and totally visible.
The area for parking or manoeuvring
●
should be a flat surface.
The vehicle should not be loaded very
●
heavily at the rear.
● The driver must be used to the system.
● There should be no damage to the vehicle
in the camera area. If the position or installa-
tion angle of the cameras have been
changed, e.g. after a rear-end collision, the
to of the
A D