Table 26 Maintenance - Time & Language - Grandstream Networks GAC2500 Administration Manual

Default Gateway
DNS Server 1
DNS Server 2
PPPoE Account ID
PPPoE Password
Alternate DNS Server
Second Alternate DNS
Server
Enable LLDP
Layer 3 QoS for SIP
Layer 3 QoS for Audio
Layer 2 QoS 802.1Q/VLAN
Tag
Layer 2 QoS 802.1p Priority
Layer 2 QoS 802.1Q/VLAN
Tag (Wi-Fi)
Layer 2 QoS 802.1p Priority
Value (Wi-Fi)
HTTP/HTTPS User-Agent
SIP User-Agent
802.1x mode
802.1x Secret
HTTP/HTTPS Proxy
Hostname
HTTP/HTTPS Proxy Port
Bypass Proxy For
Table 26 Maintenance - Time & Language
Assign NTP Server Address
DHCP Option 42 override
NTP server
DHCP Option 2 to override
Time Zone setting
Time Zone
Use 24-hour format
Firmware Version 1.0.1.34
Enter the Default Gateway when static IP is used.
Enter the DNS Server 1 address when static IP is used.
Enter the DNS Server 2 address when static IP is used.
Enter the PPPoE account ID.
Enter the PPPoE Password.
Configures alternate DNS server.
Configures secondary alternate DNS server.
It is used to enable the LLDP (Link Layer Discovery Protocol) feature on
the phone system. If it is set to "Yes", the phone system will broadcast
LLDP PDU to advertise its identity and capabilities and receive same
from a physical adjacent layer 2 peer. The default setting is "Yes".
Defines the Layer 3 QoS parameter for SIP packets. This value is used
for IP Precedence, Diff-Serv or MPLS.
Defines the Layer 3 QoS parameter for Audio packets. This value is
used for IP Precedence, Diff-Serv or MPLS.
Assigns the VLAN Tag of the Layer 2 QoS packets for LAN port. The
default value is 0. Note: Please do not change the setting before
understanding the VLAN's settings, or the phone can't get the correct IP
address.
Assigns the priority value of the Layer2 QoS packets for LAN port. The
default value is 0.
Assigns the VLAN Tag of the Layer 2 QoS packets for Wi-Fi. The
default value is 0. Note: Please do not change the setting before
understanding the VLAN's settings, or the phone can't get the correct IP
address.
Assigns the priority value of the Layer2 QoS packets for Wi-Fi. The
default value is 0.
This sets the user-agent for phonebook and screen saver
This sets the user-agent for SIP.
Allows the user to enable/disable 802.1x mode on the phone. The
default setting is "Disable".
802.1x secret certificate fie.
Upload
Specifies the HTTP/HTTPS proxy hostname for the phone to send
packets to.
Specifies the HTTP/HTTPS proxy port.
Defines the destination IP address where no proxy server is needed.
Defines the URL or IP address of the NTP server. The phone may
obtain the date and time from the server. The default setting is
us.pool.ntp.org.
Defines whether DHCP Option 42 should override NTP server or not.
When enabled, DHCP Option 42 will override the NTP server if it's set
up on the LAN. The default setting is "Yes".
Allows device to get provisioned for Time Zone from DHCP Option 2 in
the local server automatically. If it set to "Yes", the DHCP offer with
Option 2 will override the phone system's time zone setting. The default
setting is "No".
Controls the date/time display according to the specified time zone.
Use 24-hour time display format.
GAC2500 Administration Guide Page 34 of 54