Table 31 Maintenance - Event Notify; Table 32 Maintenance - Tr-069 - Grandstream Networks GAC2500 Administration Manual

Send SIP Log
Logcat
Clear Log
Log Tag
Log Priority
Debug
Capture Trace
Trace List
View Trace
Record
Recording List
View Recording
Traceroute
Target Host

Table 31 Maintenance - Event Notify

All Functions

Table 32 Maintenance - TR-069

Enable TR-069
ACS URL
Firmware Version 1.0.1.34
 Fatal
 Silent (suppress all output)
The default setting is "Verbose".
Click it display the log file on the web page.
Click the CLEAR button to delete the logs saved in the phone.
Specifies the log tag to filter the log.
Selects the log priority from the drop-down menu.
Press the START button to start capturing a trace, and press STOP to
stop the capture process. The default setting is close.
Selects the existing capture file. Press the DELETE button on the right
to delete the file.
Click the LIST button to view the traces, which are ranked in time order
when the traces were captured. Click the trace name to download it to
PC.
The captured file is saved under File Manager->Internal Storage->PPP
folder.
Press "Start" to capture recording, press "Stop" to stop. Capture
recording data is easier for users to solve audio problems. The default
setting is "No". Users could record up to 1 minute long recording data.
Select recording data and press "Delete" on the right to delete.
Click on the "list" button to view. The captured recording is sorted by
time. Click to download the data to PC.
Note: the recording file will be saved in File Manager->Internal Storage-
>Recfiles.
Input the domain name or IP address and click "Start to show trout
tracing result in page below.
Set url for specified event, send url to the configured server when the
event occurs on the device, the dynamic variables in which will be
replaced with corresponding parameters to realize event notification
purpose.
Grammatical information:
 The P address of SIP server that receive events should be at the
front, with "/" to separate dynamic variables.
 "$" should be added in front of dynamic variables. e.g.
local=$local
call-id=$call-id
 Connect dynamic variables with "&". E.g.
192.168.40.207/mac=$mac&local=$local, when
device will send to server whose address is 192.168.40.207 its MAC
address and device number.
The URL/IP address for the syslog server. The default setting is "No".
This should be filled in the URL or IP address and port number for TR-
069 Auto Configuration Server (ACS) before enabling the TR-069
GAC2500 Administration Guide
event occurs, the
Page 38 of 54