Maintenance Page Defination; Table 25 Maintenance - Network Settings - Grandstream Networks GAC2500 Administration Manual

Key Mode
Account
Name
UserID
Display Format
Show DisplayName from
Server

MAINTENANCE PAGE DEFINATION

Maintenance page lists Network Settings, Time & Language, Security Settings, Upgrade, troubleshooting
and Device Manager.

Table 25 Maintenance - Network Settings

Address Type
Enable DHCP VLAN
Host name (Option 12)
Vendor Class ID (Option 60)
IP Address
Subnet Mask
Firmware Version 1.0.1.34
Assigns a function to the Multi-purpose Key from the MPK App installed
on the GAC2500. The MPK App can be downloaded from GS Market.
The key mode options are:
a) Speed Dial
Press to dial the extension configured in UserID field.
b) Busy Lamp Field (BLF)
Monitor the extension status as configured in UserID field.
c) Call Transfer
Transfer the current active call to the extension configured in
UserID field.
d) Call Intercom
Intercom/paging to the extension configured in UserID field.
e) Speed Dial via Active Account
Similar to Speed Dial but it will dial based on the current active
account. For example, if the phone is offhook and account 2 is
active, it will call the configured extension using account 2.
f) Dial DTMF
Dial the DTMF digits filled in UserID field during the call.
g) Call Park
Configure the call park feature code to park or pick up the call.
h) Multicast Paging
It is used to send broadcast. Users could fill in Name with display
name and fill in User ID with the address to send broadcast.
i) Group Call
Set up to 6 numbers for an account to start a conference. Users
needs to add the member numbers into a list.
Selects the SIP Account used for the multi-purpose keys.
Configures the display name for the multi-purpose key.
Configures the UserID for the corresponding multi-purpose key mode.
Configures the display format for the multi-purpose keys. Users could
select display "Name", "UserID", or "UserID(Name)". The "Name" is the
name saved in GAC2500 Contacts. The default setting is "Name".
If check, the name on server will replace the one user configured
before. The default setting is "No".
Allows users to configure the appropriate network settings on the
phone. Users could select "DHCP", "Static IP" or "PPPoE". By default, it
is set to "DHCP".
Once enabled, the phone will receive DHCP option 132 (802.1Q VLAN
ID) and DHCP option 133 (QOS priority level) from DHCP server fro
local network settings. The default setting is "No".
Specifies the name of the client. This field is optional but may be
required by some Internet Service Providers.
Used by clients and servers to exchange vendor class ID.
Enter the IP address when static IP is used.
Enter the Subnet Mask when static IP is used.
GAC2500 Administration Guide Page 33 of 54