Population Order; Dimm Identification; Installing A Dimm - HP proliant ml350 gen9 User Manual

Population order

For memory configurations with a single processor or multiple processors, both LRDIMM and RDIMM must be
populated populated sequentially in alphabetical order (A through L).
After installing the DIMMs, use RBSU to configure Advanced ECC, or online spare memory support.

DIMM identification

To determine DIMM characteristics, use the label attached to the DIMM and the following illustration and
table.
Item Description
Capacity
1
Rank
2
Data width
3
Memory generation
4
Maximum memory
5
speed
CAS latency
6
DIMM type
7
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (http://www.hp.com/go/qs).

Installing a DIMM

CAUTION:
baffle, drive blanks, and access panel must be installed when the server is powered up.
Definition
8 GB
16 GB
32 GB
1R = Single-rank
2R = Dual-rank
4R = Quad-rank
x4 = 4-bit
x8 = 8-bit
DDR4
2133 MT/s
P=15
R = RDIMM (registered)
L = LRDIMM (load reduced)
To avoid damage to the hard drives, memory, and other system components, the air
Hardware options installation 52