HP proliant ml350 gen9 User Manual page 49

Remove the fan blank from fan bay 1.
15.
Install the fan in fan bay 1, making sure that the fan clicks into place.
16.
Install the access panel (on page 25).
17.
Do one of the following:
18.
For tower models, return the server to an upright position.
o
For rack models, slide the server back into the rack.
o
Connect each power cord to the server.
19.
Connect each power cord to the power source.
20.
Press the Power On/Standby button.
21.
The server exits standby mode and applies full power to the system. The system power LED changes
from amber to green.
Do one of the following:
22.
For tower models, install the bezel.
o
Hardware options installation 49