For tower models, open and remove the tower bezel (on page 24).
o
For rack models, if installed, remove the security bezel (on page 24).
o
Remove the drive blank.
2.
Installing a hot-plug drive
WARNING:
carrier at a time.
The server can support up to 24 drives in an LFF configuration and up to 48 drives in an SFF configuration.
To install the component:
Do one of the following:
1.
For tower models, open and remove the tower bezel (on page 24).
o
For rack models, if installed, remove the security bezel (on page 24).
o
Remove the drive blank.
2.
To reduce the risk of injury from electric shock, do not install more than one drive
Hardware options installation 77