Printing By Automatically Switching Between Upper And Lower Roll Paper (Mac Os) - Canon iPF840 User Manual

iPF840
•
If the same width and same media type of roll paper is loaded in the upper and lower rolls and Automat-
ically switch paper sources (paper size priority) is enabled, printing is always performed on roll pa-
Important
per 1 (upper roll paper). If you want to load roll paper of the same width and media type in the upper and
lower rolls and automatically switch between them, clear the Automatically switch paper sources (pa-
per size priority) check box.
•
If Fit Roll Paper Width is selected in Enlarged/Reduced Printing and Roll Paper (Auto) is selected in
Paper Source on the Page Setup sheet while you are performing enlarged/reduced printing with Auto-
matically switch paper sources (paper size priority) enabled, printing is always performed from roll
paper 1 (the upper roll paper).
•
If you are performing borderless printing with Automatically switch paper sources (paper size priori-
ty) enabled, only Scale to fit Roll Paper Width can be selected in Borderless Printing Method on the
Page Setup sheet. In this case, printing is always performed from roll paper 1 (the upper roll paper). If a
paper size or media type that does not support borderless printing is loaded in roll paper 1, you cannot
perform borderless printing.
Printing by Automatically Switching Between Upper and Lower Roll Paper (Mac
Printing by Automatically Switching Between Upper and Lower Roll Paper (Mac
This section describes how to print by automatically switching between roll paper 1 and roll paper 2 depending on
the print job.
•
If you set Set./Adj. Menu>System Setup>Roll Switching to No RollSwitching in the control panel, printing
may be performed on the unintended roll paper. It is recommended that you set this setting to Use Optimal Size
Important
in advance.
•
Double-roll switching cannot function if roll paper of a media type that cannot be automatically cut is fed to the
platen.
For information on support for automatic cutting, refer to Paper Reference Guide. (See "Displaying the Paper
Reference Guide.")
1
Load roll paper in the upper and lower printer rolls.
•
Load roll paper of width and media type that suits your purpose in the printer by referring to Loading Roll
Paper in the Printer Depending on the Purpose
Note
•
For details on how to load roll paper in the printer, see "Handling rolls."
2
Choose Page Setup from the application menu to
display the Page Attributes dialog box.
• Page Setup might not be displayed in the menu de-
pending on the OS you are using and the applica-
Note
tion software.
In this case, select Print from the menu in the appli-
cation software, and configure the settings in the up-
per part of the printer driver screen that is displayed.
User's Guide

Printing by Automatically Switching Between Upper and Lower Roll Paper (Mac OS)

P.335
➔
.
P.31
➔
P.342
➔
OS)
OS)
37