Canon iPF840 User Manual page 452

Menu Settings
GL2 Line &
Settings Pen
Manag-
er
Proces-
singOp-
tion
GL2 Set Print
Inter- EOP Timer
face
Setup
TCP/IP
452
Setting Item
Ln wdth correct
Warning
On-the-Fly
Detect img size
IPv4 IPv4 Mode
Proto- DHCP
col
BOOTP
RARP
IPv4 IP Address
Settings
Subnet Mask
Default G/W
DNS DNS Dync update
Settings
Pri. DNS SrvAddr
Sec. DNS SrvAddr
DNS Host Name
DNS Domain Name
IPv6 IPv6 Support
IPv6 StlessAddrs
DHCPv6
DNS DNS
Settings Dync
update
Pri. DNS SrvAddr
Description, Instructions
You can configure Black/gray and Color for each group.
The specified range is -20 to +20.
Select On to have any GL2-related warnings displayed.
Selecting On will start printing jobs sooner if you are print-
ing only HP RTL print jobs and printing would not start un-
til later. However, images may be incomplete in some ca-
ses, so be sure to check the printing results.
Sets the method of deciding the region to output in order
to print efficiently while avoiding missing images.
If Off is selected and the data contains image range infor-
mation, the image range information is followed.
If Off is selected and the data does not contain image
range information, a size with the maximum roll paper
width of the printer for the width and 1.5 times the maxi-
mum roll paper width for the length is used.
If Command priority is selected and the data contains
image range information, the image range information is
followed.
If Command priority is selected and the data does not
contain image range information, the detected minimum
image area is used.
If Detected size is selected, the detected minimum image
area is used.
Print GL2 settings information.
Specify the timeout period before cancellation of print jobs
that cannot be received by the printer.
Choose whether the printer IP address is configured auto-
matically or a static IP address is entered manually.
Specify the protocol used to configure the IP address au-
tomatically.
Specify the printer network information when using a stat-
ic IP address.
Enter the IP address assigned to the printer, as well as
the network subnet mask and default gateway.
The value that was automatically configured is displayed if
you have set IPv4 Mode to Automatic.
Specify whether DNS server registration is updated auto-
matically.
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
Statefull Specify whether DNS server registration is updated auto-
Addr matically.
State-
less
Addr
Specify the DNS server address.
iPF840
User's Guide