Specifying The Paper Length; Removing The Roll From The Printer - Canon iPF840 User Manual

Specifying the Paper Length

•
The specified media type setting is updated in the following situations.
Note •
When using sheets, if you send a print job before loading a sheet, the media type setting is updated to match the
type of paper specified by the print job.
•
When you have selected ManageRemainRoll > On on the Control Panel and a barcode is printed on the roll,
the media type setting is updated to match the type of paper specified by the barcode.
•
To change the media type setting, see "Changing the Type of Paper."

Specifying the Paper Length

Specifying the Paper Length
When changing the length of paper after the paper has been advanced, specify the length as follows.
•
Specify the paper length when you have set ManageRemainRoll to On. (See "Keeping Track of the Amount of
Roll Paper Left.")
Note
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Paper tab (
Note
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Chg. Paper Size, and then press the OK button.
4
Press the ▲ button or the▼ button to select Roll1(Uppr)Lngth or Roll2(Lwr) Lngth, and then press the
OK button.
5
Press ▲ or ▼ to select the length of paper loaded in the printer, and then press the OK button.
Specify the roll length as follows.
1.
Press the ◀ or ▶ button to move to the next field for input.
2.
Press the ▲ or ▼ button to enter the value.
3.
Repeat steps 1 and 2 to finish entering the value, and then press the OK button.

Removing the Roll from the Printer

Removing the Roll from the Printer

Remove rolls from the printer as follows.
•
If you need to cut a printed roll, select Paper Cutting in the printer menu and cut the roll at the desired position.
(See "Specifying the Cutting Method for Rolls.")
Note
352
P.358
➔
).
•
If the Tab Selection screen is not displayed, press the Menu button.
P.351
➔
Ready
OK: Paper Menu
P.360
➔
Plain Paper
Plain Paper
User's Guide
iPF840