Object Position - Canon iPF840 User Manual

Format Dialog Box
• Rotate
When you place a checkmark here, you can select Rotate Right or Rotate Left.
Rotate Right
Rotate Left
•
When several objects are selected, you cannot select Rotate.
Note
• Enl./Red.
When you place a checkmark here, you can select Scaling, Fit Paper Size, or Fit Photo Size.
Scaling
Fit Paper Size
Fit Photo Size
•
You can input between 25 and 600.
•
You can change the numbers by clicking either ▲ button or ▼ button.
Note
Position Sheet
You can rotate, enlarge, or reduce an object.
•
When the objects are not selected, you can not select Format.
Note
206
•

Object Position

You can move the object position by changing the values.
Vertical Pos
Horizontal Pos
Page Pos
Setting
Rotates the object 90 degrees clockwise.
Rotates the object 90 degrees counterclockwise.
Setting
Allows you to input the value of the enlargement or reduction ratio of an object.
Prints by enlarging or reducing each object to match the paper size. If you are using roll
paper, objects are enlarged or reduced so that the width of each object matches the width
of the roll paper.
Prints all of the objects at the specified photo size.
Setting
You can input the number of the vertical position in numerical characters.
You can input the number of the horizontal position in numerical characters.
You can input the number of the page position in numerical characters.
Details
Details
Details
iPF840
User's Guide