Reinstalling the Printer
Install the printer
1
Mount the printer on the assembled Stand and tighten the
screws firmly.
Caution
2
Remove tape and packaging material attached to the print-
er. Also open the Top Cover and remove stoppers and
spacers inside the printer.
3
Connect the power cord to the Power Supply Connector on the
back of the printer.
600
4
Plug the power cord into the outlet.
•
Moving the printer requires at least six people, holding it on both sides. Be careful to avoid back strain
and other injuries.
•
When moving the printer, firmly grasp the Carrying
Handles (a) under each side. The printer may be un-
steady if you hold it at other positions, which poses a
risk of injury from dropping the printer.
iPF840
a
User's Guide