Disassembly Instructions - Toshiba e-studio191f Service Manual

2.3.

Disassembly Instructions

2.3.1. Cover Assembly
[1. Rear Cover]
(1) Remove 1 Screw, and the SD Card Cover (605).
(2) Remove 7 Screws.
(3) Remove the Rear Cover (604).
Caution:
Remove the SD Memory Card if it was installed.
[2. Exit Cover]
(1) Remove the Rear Cover (604).
(Refer to 2.3.1. [1.Rear Cover])
(2) Remove 3 Screws.
(3) Remove the Exit Cover (602).
Caution:
When reinstalling the Exit Cover, make sure 2 Latches
are fitted inside of the Inner Cover.
[3. Control Panel Unit]
(1) Remove the Rear Cover (604).
(Refer to 2.3.1. [1.Rear Cover])
(2) Remove the Exit Cover (602).
(Refer to 2.3.1. [2.Exit Cover])
(3) Open the Right Cover (614).
(4) Remove 2 Screws.
(5) Remove the Control Panel Unit.
31
DP-1910F