Access Control - TP-Link AD7200 User Manual

Chapter 9
5. If you want to ignore the ping packets from WAN/LAN port, select
Packet From WAN/LAN Port
6. Click
Save to make the settings effective.
9. 2.

Access Control

Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
How can I
do that?
.
Block or allow specific client devices to access my network (via
wired or wireless).
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to Advanced > Security > Access Control.
3. Enable Access Control.
4. Select the access mode to either block (recommended) or
allow the device(s) in the list.
To block specific device(s)
1 ) Select Blacklist
2 ) Select the device(s) to be blocked in the
table by ticking the box.
and click Save.
Ignore Ping
Devices Online
61