Customize Your Settings - TP-Link AD7200 User Manual

Chapter 6
6. 1. 2.

Customize Your Settings

¾ To Only Share Specific Content
By default, Share All
only share specific folders, follow the steps below:
1. Visit http://tplinkwifi.net, then log in with the username and password you've set for
the router.
2. Go to Basic > USB Settings
3. Click the button to disable
4. Select the Volume Name
5. Decide the way you share the folder:
• Allow Guest Network Access:
can access this folder.
• Enable Authentication:
username and password to access the folder. Refer to
for Data Security
• Enable Write Access:
folder.
is enabled so all content on the USB disk is shared. If you want to
> Sharing Access. Focus on the
Share All, then click
and Folder Path, then enter a
If you tick this check box, guest network users
If you tick this check box, you will be required to use a
to learn more.
If you tick this check box, network clients can modify the
Folder Sharing
Add to add a new sharing folder.
Folder Name
To Set up Authentication
section.
as you like.
33