Table of Contents
Advertisement
Chapter 12
Done!
2 ) Click Save.
3 ) After configuring IGMP proxy, IPTV can work behind your
router now. You can connect your set-top box to any of
the router's Ethernet port.
If IGMP is not the technology your ISP applies to provide
IPTV service:
1 ) Tick the
Enable IPTV
2 ) Select the appropriate
Bridge
if your ISP is not listed and no other parameters
are required, and then skip to Step 4. Select
your ISP is not listed but provides necessary parameters.
3 ) After you have selected a mode, the necessary parameters
are predetermined. You can perform other configuration,
e.g. enter the
Multicast VLAN Priority
ISP.
4 ) For Russia, Singapore-ExStream, Malaysia-Unifi and
Malaysia-Maxis mode, connect the set-top box to the
predetermined LAN port. For Bridge and Custom mode,
select the
LAN
corresponding port.
5 ) Click Save.
Your IPTV setup is done now! You may need other configurations
on your set-top box before enjoying your TV.
Tips
Qos and IPTV cannot be enabled at the same time.
check box.
Mode
according to your ISP. Select
IPTV Multicast VLAN ID
in
Russia
mode according to your
type and connect the set-top box to the
Custom
if
and select the
IPTV
80
Hide quick links:
Advertisement
Table of Contents
