Quick Setup - TP-Link AD7200 User Manual

Chapter 4
4. 1.

Quick Setup

The Quick Setup Wizard will guide you through the process to set up your router to
access the Internet.
Tips:
If you need the IPv6 Internet connection, please refer to the section of
Follow the steps below to set up your router to access the Internet.
1. Visit http://tplinkwifi.net, and log in with the username and password you've set for
the router.
2. Click Quick Setup on the top of the page.
3. Select your Time Zone from the drop-down list and click Next.
4. Click Auto Detect and the router will detect your connection type automatically.
Note:
You can also choose the connection type manually. Contact your ISP if you are not sure about the Internet connection
information.
• If you use DSL line and you are only provided an account name and a password by your ISP, choose PPPoE.
• If you use cable TV or fiber cable, choose Dynamic IP.
• If you are provided more information such as IP address, Subnet Mask and Default Gateway, choose Static IP.
5. In this case, the router automatically detects Dynamic IP as the connection type.
Click Next.
"4. 3. Setting Up an IPv6 Internet Connection".
16