Table of Contents
Advertisement
Chapter 12
12. 1. Change the LAN Settings
The router is preset with a default LAN IP 192.168.0.1, which you can use to log in to its
web-based management page. The LAN IP address together with the Subnet Mask also
defines the subnet that the connected devices are on. If the IP address conflicts with
another device on your local network or your network requires a specific IP subnet, you
can change it.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Advanced
>
3. Type in a new IP Address appropriate to your needs. And Leave the
the default settings.
4. Click Save.
Note:
If you have set the Virtual Server, DMZ or DHCP address reservation, and the new LAN IP address is not in the same
subnet with the old one, then you should reconfigure them.
12. 2. Configure to Support IPTV Service
I want to:
How can
I do that?
Network
> LAN.
Configure IPTV setup to enable Internet / IPTV / Phone service
provided by my Internet Service Provider (ISP).
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to
Advanced
3. If your ISP provides the networking service based on IGMP
technology, e.g., British Telecom(BT) and Talk Talk in UK:
1 ) Tick the
IGMP Proxy
Version, either V2 or V3, according to the information
provided by your ISP.
>
Network
> IPTV.
checkbox and select the
Subnet Mask
as
IGMP
79
Hide quick links:
Advertisement
Table of Contents
