Specify Wireless Settings - TP-Link AD7200 User Manual

Chapter 12
Done!

12. 6. Specify Wireless Settings

The router's wireless network name (SSID) and password, and security option are preset
in the factory. The preset SSID and password can be found on the product label. You
can customize the wireless settings according to your needs.
Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
¾ To enable or disable the wireless function of 2.4GHz, 5GHz or 60GHz:
1. Go to Basic > Wireless.
2. The wireless radio is enabled by default, if you want to disable the wireless function of
the router, just clear the
settings will be invalid.
¾ To change the wireless network name (SSID) and wireless password:
1. Go to Basic > Wireless.
2. Create a new SSID in
network in Password. The default SSID is TP-LINK_XXXX for 2.4GHz, TP-LINK_XXXX_5G
for 5GHz, TP-LINK_XXXX_60G for 60GHz, and the value is case-sensitive.
Interface: Determined by the port (WAN/LAN) that sends out
the data packets. In the example, the data is sent to the gateway
through the LAN port, so LAN should be selected.
Description: Enter a description for this static routing entry.
5. Click OK to save the settings.
6. Check the System Routing Table
entry you've set in the
routing is set successfully.
Open a web browser on your PC. Enter the company server's IP
address to visit the company network.
Enable Wireless Radio
Network Name (SSID)
below. If you can find the
System Routing
checkbox. In this case, all the wireless
and customize the password for the
Table, the static
85