Table of Contents
Advertisement
• Your computer might not recognize any DNS server addresses, please manually
configure DNS server.
1 ) Go to
Advanced
2 ) Enter 8.8.8.8 as Primary DNS, click Save.
Tips: 8.8.8.8 is a safe and public DNS server operated by Google.
• Power cycle the modem and the TP-LINK router.
1 ) Power off your modem and TP-LINK router, leave them off for 1 minute.
2 ) Power on your modem first, wait about 2 minutes until it gets a solid cable or
Internet light.
3 ) Power back TP-LINK router.
4 ) Wait another 1 or 2 minutes and check the Internet access.
• Reset the router to factory default settings and reconfigure the router with the help
of
Quick
Setup.
• Upgrade the firmware of the router with the help of
• Check the TCP/IP settings on the particular device if all other devices can get Internet
from the router.
As the picture below shows, if the IP Address is 0.0.0.0, please try the methods below
and try again:
>
Network
>
DHCP
Server.
Upgrade the
Firmware.
108
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the AD7200 and is the answer not in the manual?
Questions and answers