Advertisement
TP Link Gigabit Powerline Starter Kit
Set Up a Secure Pow
You can create or join a secure powerline n
Tip: We recommend that you plug in the po
To create a secure powerl
1
Press the Pair button on any of the powe
for 1 second. Its Power LED
Note: If the Power LED does not blink, press the Pa
2
(
device for 1 second. Its Power LED
blinking.
3 When the Powerline LED
network has been successfully created.
To join an existing secure
1
Press the Pair button on any of the existi
devices for 1 second. Its Power LED
Note: If the Power LED does not blink, press the Pa
User Manual
2
powerline adapter for 1 second. Its Powe
starts blinking.
3
When the Powerline LED
You can create or join a sec
Tip: We recommend that yo
To create a secur
1
Press the Pair button on a
for 1 second. Its Power LE
Note: If the Power LED does no
2
(
Set Up a Sec
device for 1 second. Its P
blinking.
3 When the Powerline LED
network has been succes
You can create or join a sec
Tip: We recommend that yo
To join an existing
To create a secur
1
Press the Pair button on a
1
Press the Pair button on a
devices for 1 second. Its
for 1 second. Its Power LE
Note: If the Power LED does no
Note: If the Power LED does no
2
2
(
powerline adapter for 1 se
device for 1 second. Its P
starts blinking.
blinking.
3
When the Powerline LED
3 When the Powerline LED
network has been succes
To join an existing
1
Press the Pair button on a
devices for 1 second. Its
Note: If the Power LED does no
2
Q1. How do I reset my powe
powerline adapter for 1 se
A. With the powerline adapter plu
starts blinking.
momentarily and then comes
3
When the Powerline LED
should st
sh
lights up, a p
s
turns on, it's
Advertisement
Table of Contents
Related Manuals for TP-Link AV1000
Summary of Contents for TP-Link AV1000
- Page 1 You can create or join a sec Tip: We recommend that yo To create a secur Press the Pair button on a for 1 second. Its Power LE Note: If the Power LED does no Set Up a Secure Pow Set Up a Sec device for 1 second.
- Page 2 werline network using the Pair button on two devices at a time. in the powerline devices near each other when pairing. Press the Pair button on any of the powerline devices for 1 second. Its Power LED should start blinking. owerline network: Note: If the Power LED does not blink, press the Pair button again.
- Page 3 Power-Sav ter? are lit on all of your powerline devices. If they are visit https://www.tp 1. Visit https://www.tp-link.com, and search for your product. not, pair all devices again. BUTTON DESCRIPTION electrical outlet, press and hold 1.
- Page 4 6 seconds to reset the powerline adapter. m/support Easy Management nd search for your product. y be found at https://www.tp-link.com/en/support/ce/ ement support y be found at https://www.tp-link.com/support/ukca be found at https://www.tp-link.com/en/support/ce/ 1. Visit https://www.tp-link.com, and search for your product.
- Page 5 Frequently Asked Questions Question 1 How do I reset my powerline adapter? With the powerline adapter plugged into an electrical outlet, press and hold the Pair button for more than 6 seconds until the Power LED goes off momentarily and then comes back on. Question 2 What should I do if the Powerline LED is off? Answer 1: Try another wall socket and make sure all powerline devices are on the same electrical...
- Page 6 For technical support, the user guiude and other information visit https://www.tp-link.com/support. TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/...
Need help?
Do you have a question about the AV1000 and is the answer not in the manual?
Questions and answers