Backup And Restore Configuration Settings - TP-Link AD7200 User Manual

Chapter 13
2. Visit http://tplinkwifi.net, and log in with the username and password you've set for
the router.
3. Go to Advanced >
4. Focus on the Device Information section. Make sure the downloaded firmware file is
matched with the
5. Focus on the Local Upgrade
firmware file, and click Upgrade.
6. Wait a few moments for the upgrading and rebooting.

13. 4. Backup and Restore Configuration Settings

The configuration settings are stored as a configuration file in the router. You can
backup the configuration file to your computer for future use and restore the router to
a previous settings from the backup file when needed. Moreover, if necessary you can
erase the current settings and reset the router to the default factory settings.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced >
¾ To backup configuration settings:
Click Backup to save a copy of the current settings to your local computer. A ' . bin' file of
the current settings will be stored to your computer.
¾ To restore configuration settings:
1. Click Browse to locate the backup configuration file stored on your computer, and
click Restore.
System Tools > Firmware
Hardware Version.
section. Click
System Tools > Backup &
Upgrade.
Browse to locate the downloaded new
Restore.
94