Table of Contents
Advertisement
Level 1
Level 2
Report Setting
Print Fax
-
Remote Access
-
Remaining Jobs -
Miscellaneous
Memory Security
Distinctive
(USA and Canada
only)
Area Code
(USA only)
[Settings] > [All Settings] > [Network]
Level 1
Level 2
Wired LAN
TCP/IP
Ethernet
Wired Status
MAC Address
WLAN
TCP/IP
Level 3
Descriptions
If you select other than Off and Every 50 Faxes, you
can set the time for the option.
If you select Every 7 Days, you can set the day of the
week.
-
Print received faxes stored in the memory.
-
Set your own code for Remote Retrieval.
-
Check which scheduled jobs are in the memory and
cancel selected jobs.
-
Prohibit most functions except receiving faxes into
memory.
Distinctive
Turn on the telephone company's Distinctive Ring
subscriber service to register your new ring pattern on
Ring Pattern
the machine.
-
Set your 3-digit area code only if you do not dial it
within your own area code.
Level 3
BOOT Method
IP Address
Subnet Mask
Gateway
Node Name
WINS
Configuration
WINS Server
DNS Server
APIPA
IPv6
-
-
-
BOOT Method
IP Address
Subnet Mask
Gateway
Node Name
WINS
Configuration
Descriptions
Select the BOOT method that best suits your
needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary or
secondary WINS server.
Specify the IP address of the primary or
secondary DNS server.
Set the machine to allocate the IP address from
the link-local address range automatically.
Turn the IPv6 protocol on or off. To use the IPv6
protocol, go to the Brother Solutions Center at
support.brother.com
for more information.
Select the Ethernet link mode.
View the current wired status.
View the machine's MAC address.
Select the BOOT method that best suits your
needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
526
Advertisement
Table of Contents
