Table of Contents
Advertisement
Home >
Machine Settings
Date & Time
Set the Date & Time
The LCD displays the date and time. If they are not current, re-enter them. You can add the date and time to
each fax you send by setting your Station ID.
1. Press
[Settings].
2. Press
[Date & Time].
3. Press [Date].
4. Enter the last two digits of the year on the Touchscreen, and then press [OK].
5. Enter two digits for the month on the Touchscreen, and then press [OK].
6. Enter two digits for the day on the Touchscreen, and then press [OK].
7. Press [Clock Type].
8. Press [12h Clock] or [24h Clock].
9. Press [Time].
10. To enter the time, do one of the following:
•
If you selected [12h Clock], enter the time (in 12-hour format) using the Touchscreen, and then press
[AM] or [PM].
Press [OK].
•
If you selected [24h Clock], enter the time (in 24-hour format) using the Touchscreen.
Press [OK].
11. Press
.
Related Information
•
General Settings
•
Set Your Station ID
>
Change Machine Settings from the Control Panel
>
General Settings
> Set the
509
Advertisement
Table of Contents
