Table of Contents
Advertisement
Home >
Machine Settings
Your Station ID
Set Your Station ID
Set the machine's Station ID if you want the date and time to appear on each fax you send.
1. Press
[Settings] > [All Settings] > [Initial Setup] > [Station ID].
2. Press [Fax].
3. Enter your fax number (up to 20 digits) on the Touchscreen, and then press [OK].
4. Press [Name].
5. Enter your name (up to 20 characters) using the Touchscreen, and then press [OK].
•
Press
differ depending on your country.)
•
If you entered an incorrect character and want to change it, press d or c to move the cursor to it. Press
and then enter the correct character.
•
To enter a space, press [Space].
6. Press
.
NOTE
(USA only)
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or
electronic device to send any message via a telephone fax machine unless such messages clearly
contain, in a margin at the top or bottom of each transmitted page, or on the first page of the
transmission, the date and time it is sent and an identification of the business or other entity or other
individual sending the message and the telephone number of the sending machines or such business,
other entity or individual. To program this information into the fax machine, see Set the date and time and
Set your Station ID.
Related Information
•
General Settings
•
Transfer Faxes to Another Fax Machine
•
Transfer the Fax Journal Report to Another Fax Machine
•
Enter Text on Your Brother Machine
•
Set the Date & Time
>
Change Machine Settings from the Control Panel
to cycle between letters, numbers and special symbols. (The available characters may
>
General Settings
> Set
512
Advertisement
Table of Contents
